The SMC CDRB1BW50-90D is a rotary actuator belonging to the CRB1 series, featuring a double-acting, vane-type design.The smc air cylinders has a bore diameter of 50mm and a standard stroke of 90mm, making it suitable for applications that require precise smc controls and stability, such as automated machinery and robotic arms.
Product Specifications
Bore diameter: 50mm, providing ample force and stability.
Standard stroke: 90mm, ideal for short-stroke applications.
Operation type: Double-acting, capable of exerting force in both directions.
Maximum pressure: 1 MPa, ensuring stable operation under high pressure.
Swivel angle: 90°, suitable for applications requiring precise angular smc controls.
Port location: On the side of the smc air cylinders body, facilitating installation and maintenance.
Shaft type: Dual shaft (long shaft with key & four-sided milling), offering various installation options.
Built-in magnet: Type D, convenient for installing smc magnet switch.
Mounting type: Basic type, allowing for direct mounting or foot-type mounting.
Product Features
Compact design: Achieved through built-in angle adjustment and smc magnet switch units, reducing the overall length by 44% and weight by 48%.
Easy installation: Piping, wiring, and angle adjustment units are concentrated on the same side, simplifying installation and maintenance.
Angle adjustment: The angle adjustment screw allows for convenient adjustment of the start and end positions.
Multiple shaft types: Offering various shaft types to meet different installation requirements.
Interchangeability: The mounting hole spacing and shaft shape are the same as the old model, facilitating replacement and upgrade.
Application Scenarios The CDRB1BW50-90D rotary actuator is widely used in automated equipment, robotic arms, and robots, suitable for applications requiring precise angular smc controls and high stability. Its compact design and high-performance features make it an ideal choice in the field of industrial automation.
Usage Instructions
Installation and Wiring
Installation environment: Choose a well-ventilated, dust-free, and non-corrosive gas environment for installation. Avoid installing the smc air cylinders in high-temperature, high-humidity, or strong electromagnetic interference environments.
Installation method: Ensure the smc air cylinders is installed vertically for proper heat dissipation. Use appropriate fixing methods during installation to prevent equipment damage from vibrations.
Air source connection: When connecting the air source, ensure the specifications of the air source pipe meet the requirements and pay attention to the cleanliness and dryness of the air source.
Parameter Settings
Basic parameter settings: Including air source pressure and swivel angle, set according to actual application requirements.
Advanced function configuration: Such as angle adjustment and smc magnet switch settings, configure according to specific application scenarios to achieve more complex smc controls functions.
Maintenance and Inspection
Regular inspection: Check the appearance of the smc air cylinders for damage, aging of seals, and cleanliness of the air source. Regularly clean the dust on the surface of the smc air cylinders to ensure its normal operation.
Parameter verification: Regularly verify the parameter settings of the smc air cylinders to ensure they remain consistent with actual application requirements.
Fault diagnosis: When the equipment fails, promptly check the fault code and troubleshoot according to the fault diagnosis guide in the manual.
Precautions
Environmental conditions: Avoid using the product in high-temperature, high-humidity, or strong electromagnetic interference environments to prevent affecting its performance and lifespan.
Air source requirements: Ensure the air source pressure is stable to avoid damage to the smc air cylinders from pressure fluctuations. After the equipment is disconnected from the air source, wait for a certain period before reconnecting to avoid damaging the equipment.
Safe operation: Avoid contact with live parts during equipment operation to ensure the safety of operators. When performing maintenance and inspection, the air source must be disconnected, and the pressure inside the smc air cylinders must be fully released.
Frequently Asked Questions (FAQ)
How to perform angle adjustment?
The importance of angle adjustment: Angle adjustment is a crucial step to ensure the smc air cylinders stops at precise positions, enhancing smc controls accuracy and system stability. When performing angle adjustment, first determine the initial and target positions of the air cylinders.
Precautions during angle adjustment: When adjusting the angle, ensure the smc air cylinders is stationary and the air source is disconnected. Also, use the appropriate tools for the adjustment screws to avoid damage.
The effect after angle adjustment: After completing the angle adjustment, the smc air cylinders will be able to stop accurately at the specified positions, helping to improve the system's response speed and smc controls accuracy, meeting the requirements for high-precision smc controls applications.
How to configure the smc magnet switch of the Smc air cylinders?
smc magnet switch type: The Smc CDRB1BW50-90D smc air cylinders supports the installation of small smc magnet switches, such as the M9B type. Users can choose the appropriate smc magnet switch for configuration according to actual needs.
smc magnet switch wiring: When configuring the smc magnet switch, ensure the connection is correct. Use shielded cables for connection and ensure the shielding layer of the cable is properly grounded to reduce electromagnetic interference.
smc magnet switch parameter settings: Set the parameters of the smc magnet switch according to its requirements. Also, ensure the parameters are consistent with the smc controls system to achieve reliable signal transmission.
How to choose the installation method of the air cylinders?
Choose according to application requirements: When selecting the installation method of the air cylinders, determine it based on the actual application needs. If frequent movement or position adjustment is required, choose foot-type mounting; if it needs to be fixed in a specific position, choose direct mounting.
Characteristics of installation methods: Direct mounting is simple and quick, suitable for applications in fixed positions; foot-type mounting is flexible and convenient, suitable for applications requiring position adjustment.
Parameter settings: After selecting the installation method, set the parameters according to specific application requirements to achieve the best installation effect.
What is the cooling method of the Smc air cylinders?
Cooling method: The Smc CDRB1BW50-90D smc air cylinders uses natural cooling, dissipating heat through the heat dissipation fins on the surface of the air cylinders.
Installation requirements: When installing the air cylinders, ensure there is enough space around it for air circulation. Avoid installing the smc air cylinders in a closed or poorly ventilated environment to prevent affecting the cooling effect.
Maintenance and care: Regularly clean the dust on the surface of the smc air cylinders to effectively prevent equipment overheating due to poor cooling. Also, check the seals of the smc air cylinders to ensure their normal operation.
How to avoid electromagnetic interference of the Smc air cylinders?
Built-in filter: The smc air cylinders is equipped with an EMC filter, complying with relevant electromagnetic compatibility standards, which can effectively suppress electromagnetic interference.
Wiring precautions: When wiring, try to avoid placing signal lines close to air source pipes to reduce electromagnetic interference. Also, use shielded cables for signal line connections and ensure the shielding layer is properly grounded.
Grounding measures: Good grounding is an important means to reduce electromagnetic interference. Ensure the equipment is properly grounded and complies with national and local electrical safety regulations.
What are the protection functions of the Smc air cylinders?
Overload protection: When the load of the smc air cylinders exceeds the rated value, the smc air cylinders will automatically stop running to protect the smc air cylinders and equipment.
Overheat protection: The smc air cylinders is equipped with a temperature sensor inside. When the temperature exceeds the set value, it will automatically shut down to prevent damage caused by overheating.
Overpressure and underpressure protection: When the air source pressure is too high or too low, the smc air cylinders will automatically shut down to protect the equipment. In addition, it also has seal protection functions to ensure the safe operation of the system.
How to perform regular maintenance on the air cylinders?
Appearance inspection: Regularly check the appearance of the smc air cylinders for damage or abnormalities, such as cracks in the casing or aging of seals.
Cooling system maintenance: Clean the dust on the surface of the smc air cylinders to ensure the normal operation of the cooling system. Check the seals of the air cylinders, and replace them in time if there are any abnormalities.
Electrical connection check: Check whether the connection of the air source pipe is firm to ensure good contact. Also, check the operating state of the smc air cylinders and deal with any abnormalities in time.
What should be noted when installing the air cylinders?
Installation location: Choose an environment with good ventilation, free of dust, and non-corrosive gases for installation. Avoid installing the smc air cylinders in high-temperature, high-humidity, or strong electromagnetic interference environments.
Installation method: Ensure the smc air cylinders is installed vertically for proper heat dissipation. Use appropriate fixing methods during installation to prevent equipment damage from vibrations.
Air source connection: When connecting the air source, ensure the specifications of the air source pipe meet the requirements and pay attention to the cleanliness and dryness of the air source. Also, ensure the equipment is properly grounded.
How to choose the smc controls mode of the Smc air cylinders?
Choose according to application requirements: For applications requiring high-precision angle smc controls, choose the smc controls mode with a smc magnet switch; for general constant-speed smc controls applications, choose the smc controls mode without a smc magnet switch.
Characteristics of smc controls modes: The smc controls mode with a smc magnet switch can achieve high-precision angle and position smc smcs, suitable for applications with high smc controls accuracy requirements; the smc controls mode without a smc magnet switch is simple and easy to use, suitable for general constant-speed smc controls.
Parameter settings: After selecting the smc controls mode, set the parameters according to specific application requirements to achieve the best smc controls effect.
How to set the frequency setting channel of the air cylinders?
Frequency setting method: The frequency can be set through the smc air cylinders panel, external analog signals, or digital signals. Users can choose the appropriate frequency setting method according to actual application requirements.
Signal source requirements: When setting the frequency setting channel, ensure the stability and accuracy of the signal source. For example, when using external analog signals for frequency setting, ensure the stability and anti-interference ability of the signal.
Parameter configuration: According to the selected frequency setting method, perform the corresponding parameter configuration. For example, for external analog signal setting, set the input range of the signal and the corresponding frequency range.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
