The AMG-EL350 filiter element is a companion smc frl for the AMG series of smc moisture separator, primarily used to remove water droplets from compressed air, with a dehydration rate as high as 99%. It's simple and easy to use; just place it near the air path to effectively remove water droplets. It's widely used in various industrial scenarios that require water filter of compressed air.
Size: 350
Thread Type: Rc
Pipe Diameter: 04 (1/2)
Smc Frl Material: Glass Fiber
Applicable Model: AM350C
Accessories: Gasket (1), O-ring (1)
Product Features
High-Efficiency Dehydration: It can effectively remove water droplets from compressed air, with a dehydration rate of up to 99%, ensuring the dryness of the compressed air and improving the operating efficiency and service life of subsequent equipment.
Easy Installation: The design is simple and easy to install. Just follow the instructions in the manual for a few simple steps to complete the installation. No complicated tools or procedures are required.
Simple Maintenance: The smc frl element is easy to replace. When red spots appear on the surface of the smc frl element or the pressure drop reaches 0.1MPa, it's time to replace it. The maintenance cost is low.
Application Scenarios
Industrial Production: In various industrial production processes, such as machinery manufacturing, electronics production, and chemical industry, the dryness of compressed air is crucial for the normal operation of production equipment. The AMG-EL350 smc frl element can effectively remove moisture from compressed air, ensuring the stable operation of equipment.
Food Processing: In the food processing industry, the cleanliness and dryness of compressed air directly affect the quality and safety of food. Using the AMG-EL350 smc frl element can effectively remove moisture and impurities from compressed air, ensuring the hygiene and safety of the food processing process.
Medical Equipment: In medical equipment, the purity and dryness of compressed air are crucial for the performance of the equipment and the health of patients. The AMG-EL350 smc frl element can effectively remove moisture and impurities from compressed air, ensuring the normal operation of medical equipment and the health of patients.
Instructions for Use
Installation:
Ensure the installation environment is clean and dry, free from corrosive gases and strong electromagnetic interference.
Follow the installation steps in the manual to install the smc frl element into the AMG350C moisture separator, ensuring it is securely installed and well-sealed.
Usage:
During use, regularly check the condition of the smc frl element, observing whether there are red spots on the surface or if the pressure drop has reached 0.1MPa. If any abnormalities are detected, replace the smc frl element promptly.
Ensure the direction of the compressed air's inlet and outlet is correct, following the arrow direction for the pipes. Do not install in reverse, and ensure the inlet and outlet are installed horizontally.
Maintenance:
Regularly clean the surface of the smc frl element to remove dust and impurities, keeping it clean.
Regularly check the sealing condition of the smc frl element. If any leakage is detected, replace the sealing parts promptly.
Precautions
Environmental Conditions: Avoid using the product in environments with high temperatures, high humidity, or strong electromagnetic interference, as this may affect its performance and lifespan.
Installation Requirements: During installation, ensure the smc frl element is installed in the correct direction. The inlet and outlet must not be installed in reverse, and they should be installed horizontally.
Maintenance and Care: Regularly check the condition of the smc frl element and replace it promptly to avoid equipment failure due to smc frl blockage.
Frequently Asked Questions (FAQ)
What is the replacement cycle for the AMG-EL350 smc frl element?
Generally, the replacement cycle is one year or when the pressure drop reaches 0.1MPa.
The replacement cycle may vary depending on the usage environment and the cleanliness of the compressed air. It is recommended to regularly check the condition of the smc frl element and replace it in a timely manner to ensure the normal operation of the equipment.
If red spots appear on the surface of the smc frl element during use, it should also be replaced promptly.
Is there a specific installation direction for the AMG-EL350 smc frl element?
Yes, there are strict requirements for the installation direction of the AMG-EL350 smc frl element.
During installation, the pipes must be connected according to the arrow direction. Reverse installation is not allowed, and the inlet and outlet must be installed horizontally. Otherwise, it may affect the filtering effect of the smc frl element and the normal operation of the equipment.
If the installation direction is incorrect, it may cause damage to the smc frl element or equipment failure. Therefore, it is essential to carefully check the installation direction during installation.
What equipment can the AMG-EL350 smc frl element be used for?
The AMG-EL350 smc frl element is suitable for the AMG350C moisture separator.
This smc frl element is mainly used to remove water droplets from compressed air and is suitable for various industrial equipment that requires water filter of compressed air, such as air compressors, pneumatic tools, and pneumatic valves.
When selecting a smc frl element, it is necessary to choose the appropriate smc frl element model based on the equipment model and the flow and pressure of the compressed air to ensure the normal operation of the equipment and the filtering effect of the smc frl element.
What is the filtration precision of the AMG-EL350 smc frl element?
The filtration precision of the AMG-EL350 smc frl element is 0.3μm.
This smc frl element can effectively remove water droplets and larger particle impurities from compressed air, ensuring the dryness and cleanliness of the compressed air, and improving the operating efficiency and service life of the equipment.
For higher precision filtration requirements, other models of smc frl elements or filters can be considered, such as micro-mist smc moisture separator or oil mist smc moisture separator.
What should be noted when installing and replacing the AMG-EL350 smc frl element?
When installing and replacing the AMG-EL350 smc frl element, the following points should be noted:
Ensure the installation environment is clean and dry, free from corrosive gases and strong electromagnetic interference.
Follow the installation steps in the manual to install the smc frl element into the AMG350C moisture separator, ensuring it is securely installed and well-sealed.
During installation, the pipes must be connected according to the arrow direction. Reverse installation is not allowed, and the inlet and outlet must be installed horizontally.
When replacing the smc frl element, the power and air source of the equipment must be turned off first to ensure the equipment is in a shutdown state and to avoid accidents during the replacement process.
After replacing the smc frl element, it is necessary to debug and test the operation of the equipment to ensure its normal operation and the filtering effect of the smc frl element.
What are the maintenance and care requirements for the AMG-EL350 smc frl element?
The maintenance and care requirements for the AMG-EL350 smc frl element are as follows:
Regularly check the condition of the smc frl element, observing whether there are red spots on the surface or if the pressure drop has reached 0.1MPa. If any abnormalities are detected, replace the smc frl element promptly.
Regularly clean the surface of the smc frl element to remove dust and impurities, keeping it clean to avoid equipment failure due to smc frlblockage.
Regularly check the sealing condition of the smc frl element. If any leakage is detected, replace the sealing parts promptly to ensure good sealing of the smc frl element.
If the flow or pressure of the compressed air from the equipment is abnormal during use, it is also necessary to promptly check the condition of the smc frl element to exclude smc frl element failure.
What accessories come with the AMG-EL350 smc frl element?
The accessories for the AMG-EL350 smc frl element include a gasket (1) and an O-ring (1).
These accessories are mainly used for the sealing and fixing of the smc frl element, ensuring it is securely installed and well-sealed.
When replacing the smc frl element, it is necessary to check the condition of the accessories. If any damage or aging is detected, they should be replaced promptly to avoid poor sealing of the smc frl element due to accessory failure.
What is the applicable fluid for the AMG-EL350 smc frl element?
The applicable fluid for the AMG-EL350 smc frl element is standard compressed air.
This smc frl element is mainly used to remove water droplets and impurities from compressed air and is suitable for compressed air used in various industrial productions.
For other special fluids, such as oil mist or micro-mist, other models of smc frl elements or filters should be selected for filtration.
Is there a specific flow direction requirement for the AMG-EL350 smc frl element?
Yes, there is a specific flow direction requirement for the AMG-EL350 smc frl element.
During installation, the pipes must be connected according to the arrow direction to ensure the correct flow direction of the compressed air. Otherwise, it may affect the filtering effect of the smc frl element and the normal operation of the equipment.
If the flow direction is incorrect, it may cause damage to the smc frl element or equipment failure. Therefore, it is essential to carefully check the flow direction during installation.
What are the requirements for the lubricating oil of the AMG-EL350 smc frl element?
The lubricating oil for the AMG-EL350 smc frl element is standard lubricating oil.
During use, it is necessary to regularly check the oil level and quality of the lubricating oil to ensure its normal supply and cleanliness, avoiding equipment failure due to insufficient or deteriorated lubricating oil.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
