PSE530-M5-L is one of the high-precision smc sensors, smc miniature fittings as well as pneumatics parts. The PSE531-M5-L (for vacuum) has a pressure range of 0 to -101 kPa and is suitable for vacuum environments. The PSE532-M5-L (for low pressure) has a pressure range of 0 to 101 kPa and is designed for low-pressure applications. The PSE533-M5-L (for compound use) covers a pressure range of -101 to 101 kPa and is ideal for combined positive pressure and vacuum measurements.

The PSE530-M5-L features a split structure, making it perfect for installation in space-limited environments. This model provides high-precision and stable analog output within the positive pressure measurement range, making it suitable for applications that require high accuracy. Equipped with a 3-meter sensor cable, the PSE530-M5-L is easy to install and wire. It is designed for industrial automation scenarios that require high-precision positive pressure measurement, such as pneumatic systems, mechanical manufacturing, medical equipment, and environmental monitoring.
Product Specifications
Pressure Range: 0 to 1 MPa.
Output Signal: Analog output of 1 to 5 VDC, with an output impedance of approximately 1 kΩ.
Power Supply Voltage: DC12 to 24V ±10%, with a maximum voltage fluctuation of 10%.
Current Consumption: 15 mA or lower (when no load is applied).
Accuracy: At 25°C, the accuracy within the rated pressure range is ±2% F.S., within the extended analog output range is ±5% F.S., linearity error is ±1% F.S., repeatability is ±1% F.S., and power supply voltage influence is ±1% F.S. or lower.
Environmental Adaptability: Operating temperature range is 0 to 50°C, storage temperature range is -10 to 70°C (no condensation or freezing), and operating humidity range is 35 to 85% RH.
Protection Rating: IP40.
Connection: M5×0.8 external thread, standard M5 interface.
Cable Length: Standard sensor cable length is 3 meters.
Product Features
High-Precision Measurement: Provides accurate pressure measurement to ensure the stability and reliability of automation systems.
Analog Output: The 1 to 5 V analog output signal is easy to integrate into various automation control systems.
Compact Design: Its small size makes it easy to install in equipment with limited space.
Wide Operating Temperature Range: It can operate within a temperature range of 0 to 50°C, ensuring stability in different environments.
High Reliability: It has excellent anti-interference capabilities and long-term stability.
Applications
The PSE530-M5-L is suitable for a variety of industrial automation fields, including but not limited to:
Pneumatic Systems: Used to monitor and control the pressure of cylinders, pneumatic valves, and other equipment.
Mechanical Manufacturing: Monitors pressure on automated production lines to ensure stable equipment operation.
Environmental Monitoring: Used to monitor gas pressure to ensure the safe operation of systems.
Medical Equipment: Provides reliable monitoring in medical devices that require precise pressure control.
Installation and Wiring Instructions
Installation Environment: Choose a dust-free, non-corrosive gas, and low electromagnetic interference environment. Ensure good heat dissipation for the device.
Wiring Requirements: Follow the wiring diagram in the product manual strictly to ensure correct connections of power and signal lines.
Grounding Protection: Ensure proper grounding of the device in accordance with national and local electrical safety standards.
Parameter Settings
Power Supply Voltage: Ensure the power supply voltage is within the DC12 to 24V range.
Signal Calibration: Calibrate the sensor's output signal according to the specific application requirements.
Maintenance and Inspection
Regular Checks: Inspect the sensor for any damage, check for cable wear, and ensure secure connections.
Cleaning and Maintenance: Regularly clean the sensor surface and cables to prevent dust accumulation that may affect performance.
Troubleshooting: When the device malfunctions, promptly check the power supply voltage, signal output, and wiring connections.
Precautions
Environmental Conditions: Avoid using the product in high-temperature, high-humidity, or strong electromagnetic interference environments to prevent performance degradation and reduced lifespan.
Power Requirements: Ensure stable power supply voltage to prevent damage to the sensor from voltage fluctuations.
Safe Operation: Avoid contact with live parts during device operation to ensure operator safety.
Frequently Asked Questions (FAQ)
What is the accuracy of the PSE530-M5-L?
Importance of Accuracy: High-precision pressure measurement is key to ensuring the stable operation of automation systems. The PSE530-M5-L has an accuracy of ±2% F.S. within the rated pressure range and ±5% F.S. within the extended analog output range. This meets the requirements of most industrial applications.
Source of Accuracy: The sensor uses advanced sensing technology combined with a high-precision analog output signal (1 to 5 V) to ensure accurate measurements across different pressure ranges.
Accuracy in Practical Applications: In real-world applications, the accuracy of the PSE530-M5-L effectively reduces measurement errors, enhancing system reliability and efficiency.
What is the operating temperature range of such smc miniature fittings?
Operating Temperature Range: The PSE530-M5-L operates within a temperature range of 0 to 50°C, with a storage temperature range of -10 to 70°C.
Temperature Impact on Performance: Temperature variations can affect the sensor's accuracy and performance. The PSE530-M5-L has a temperature characteristic of ±2% F.S. at 25°C, making it suitable for common industrial environments.
Adaptability to Temperature Ranges: The sensor is suitable for a variety of industrial scenarios. However, in extreme temperature conditions (close to the temperature limits), additional protective measures are recommended.
What is the output signal range of such smc sensors?
Output Signal Range: The PSE530-M5-L provides an analog output signal of 1 to 5 V, with an extended analog output range of 0.6 to 1 V.
Significance of Signal Range: The 1 to 5 V output signal range is easy to integrate into various automation control systems and provides sufficient dynamic range to meet different pressure measurement needs.
Signal Stability: The sensor's output signal is stable and less affected by power supply voltage fluctuations (within the 12 to 24V range, the analog output has a relative fluctuation of ±1% F.S. at 18V), ensuring system reliability and accuracy.
What should be considered when installing such smc miniature fittings?
Installation Environment: Choose a dust-free, non-corrosive gas, and low electromagnetic interference environment. Avoid installing the sensor in high-temperature, high-humidity, or strong electromagnetic interference areas.
Installation Method: Ensure the sensor is installed vertically to facilitate heat dissipation and reduce the impact of vibrations.
Grounding Requirements: Proper grounding must be ensured during installation, in accordance with national and local electrical safety standards.
What is the cable length of such smc sensors?
Cable Length: The PSE530-M5-L comes with a standard 3-meter sensor cable.
Cable Length Selection: The 3-meter cable length meets most on-site installation requirements and avoids signal interference caused by excessively long cables.
Cable Maintenance: Regularly inspect the cable for wear to ensure good insulation and prevent signal interruption due to cable damage.
What is the pressure resistance capability of this type of smc pneumatics parts?
Pressure Resistance Capability: The PSE530-M5-L has a pressure resistance capability of 1.5 MPa.
Significance of Pressure Resistance: In industrial applications, equipment may face unexpected high-pressure surges. The sensor's pressure resistance capability effectively protects the device from damage.
Usage Precautions: Although the sensor has a high pressure resistance capability, it is essential to ensure that the pressure does not exceed the rated range (0 to 1 MPa) during normal operation to extend the device's lifespan.
What is the protection rating of such smc miniature fittings?
Protection Rating: The PSE530-M5-L has a protection rating of IP40.
Significance of Protection Rating: The IP40 rating effectively prevents solid foreign objects from entering the device and provides a certain degree of dust protection.
Environmental Adaptability: When selecting an installation location, avoid exposing the sensor to dusty or humid environments to ensure long-term stable operation.
What is the repeatability of the smc pressure sensor?
Repeatability: The PSE530-M5-L has a repeatability of ±1% F.S.
Importance of Repeatability: Repeatability refers to the consistency of the sensor's output when measuring the same pressure multiple times. High repeatability ensures the reliability and stability of measurement results.
Performance in Practical Applications: In real-world applications, the repeatability of the PSE530-M5-L effectively reduces measurement errors and ensures long-term stable system operation.
What is the linearity error of this type of smc pneumatics parts?
Linearity Error: The PSE530-M5-L has a linearity error of ±1% F.S.
Significance of Linearity Error: Linearity error refers to the deviation between the sensor's output signal and the actual pressure in a linear relationship. Low linearity error ensures accurate measurement results.
Impact in Practical Applications: Sensors with low linearity error provide more accurate pressure measurements, reducing system errors.
What is the power supply voltage influence on this type of smc pneumatics parts?
Power Supply Voltage Influence: The PSE530-M5-L has a power supply voltage influence of ±1% F.S. or lower.
Significance of Power Supply Voltage Influence: Power supply voltage fluctuations can affect the sensor's output signal. The sensor's low sensitivity to voltage fluctuations ensures stable output signals.
Usage Precautions: Although the sensor has good adaptability to power supply voltage fluctuations, it is essential to ensure that the power supply voltage remains stable within the DC12 to 24V range to extend the device's lifespan and improve measurement accuracy.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.