The SMC EAV5000-F10-5YO-Q is a 24V pneumatic solenoid valve designed for efficiency, energy-saving capabilities, and precise control. This quick exhaust valve, part of the AV5000 series, is widely used in automated machinery and pneumatic control systems.
Its fine control of start-up speed, combined with compatibility with SMC air fittings, makes it ideal for protecting systems or enhancing operational comfort. With this 24V pneumatic solenoid valve, users benefit from advanced safety features and high performance.
Product Parameters
Main body size: 50mm, corresponding to the standard size of 1 inch.
Thread type: G 1", suitable for standard pneumatic system connections.
Tube connection size: 1 inch, specifically designed for the AV5000 series.
Wiring method: Y-type DIN-type socket, without plug, facilitating electrical connections.
Coil rated voltage: DC24V, suitable for various power environments.
Working pressure range: 0.2 → 1 MPa.
Pressure resistance: 1.5 MPa.
Ambient temperature: 0 → +60°C.
Flow: 6650l/min.
Power consumption: 1.8W.
Product Features
Precise Control: Supplies air at a low speed during start-up, gradually increasing system pressure, and performs rapid exhaust when air supply is cut, effectively protecting pneumatic systems.
Energy-saving Characteristics: With a power consumption of only 1.8W, this 24V pneumatic solenoid valve is highly efficient.
Improved Flow Characteristics: Flow characteristics have been improved by up to 2.3 times, with a C value of 34.8 dm³/(s·bar).
Safety Assurance: Includes an LED indicator light and overvoltage protection circuit, enhancing operational safety.
Easy Installation: Designed for compatibility with SMC air fittings for quick and hassle-free setup.
Manual Operation: Features a non-locking push-button for manual control in emergencies.
Application Scenarios
The EAV5000-F10-5YO-Q quick exhaust valve is ideal for automated machinery and pneumatic control systems. It is used extensively in automotive, industrial, and manufacturing fields where precise system protection or operational comfort is required.
Usage Instructions
Installation and Wiring
Environment: Choose a well-ventilated, dust-free area with no corrosive gases. Avoid high-temperature or high-humidity environments.
Method: Install vertically to ensure proper heat dissipation, and secure to avoid vibrations.
Power Connection: Use appropriately specified cables and ensure correct grounding.
Parameter Settings
Basic Settings: Set motor parameters and control methods per application needs.
Advanced Configuration: Configure PID control and multi-speed control for complex applications.
Maintenance and Inspection
Regular Checks: Inspect for external damage or dust buildup.
Parameter Verification: Confirm parameter settings match operational needs.
Fault Diagnosis: Use the manual’s guide for troubleshooting.
Precautions
Avoid unstable voltage conditions to prevent damage. Ensure proper discharge before restarting.
Maintain system grounding and avoid contact with live parts during operation or inspection.
FAQ
How to perform motor auto-tuning?
Importance: Auto-tuning ensures compatibility between the 24V pneumatic solenoid valve and the motor, improving control accuracy.
Precautions: Ensure the motor is stationary during auto-tuning to avoid damage.
Effects: The valve adjusts control parameters for optimal performance, supporting high-precision applications.
How to configure the communication interface of the EAV5000-F10-5YO-Q?
Type: Uses a Y-type DIN-type socket without a plug.
Connection: Use shielded cables, and ensure proper grounding.
Settings: Configure the address, baud rate, data bits, and stop bits according to protocol.
How to select the power range?
Load Demand: Match the solenoid valve’s power range to the motor’s load condition.
Safety Factor: Opt for a slightly higher power rating to handle fluctuations.
Overload Capacity: Avoid long-term overload to maintain performance and longevity.
What is the cooling method?
Cooling Method: Natural cooling with heat sinks.
Installation: Ensure proper ventilation around the quick exhaust valve.
Maintenance: Clean dust from the heat sinks regularly.
How to avoid electromagnetic interference?
Filter: Built-in EMC filter complies with standards.
Wiring: Use shielded cables and separate power and signal lines.
Grounding: Ensure proper grounding for reduced interference.
What protection functions are included?
Overload, overheat, overvoltage, undervoltage, short-circuit, and phase loss protections safeguard the system.
How to perform regular maintenance?
Inspect appearance and cooling components.
Verify electrical connections.
Monitor motor conditions for anomalies.
What should be noted during installation?
Install in ventilated, dust-free areas.
Ensure vertical alignment for heat dissipation.
Use proper grounding for safety.
How to choose the control mode?
Application Needs: Select sensorless vector control for high-precision needs or V/F control for general applications.
Settings: Adjust parameters accordingly for optimal results.
How to set the frequency setting channel?
Methods: Choose from panel controls, external analog, or digital signals.
Signal Stability: Ensure a stable and interference-free source.
Configuration: Set parameters based on signal type and operational requirements.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
