The SMC CY1SG15-250Z is a magnetic coupled rodless cylinder, belonging to the CY1S-Z series. This rodless actuator features a compact design, outstanding performance, and high reliability, making it suitable for a variety of industrial automation applications.
Main Parameters
Bore diameter: 15mm
Stroke: 250mm
Maximum operating pressure: 0.7 MPa
Absolute maximum pressure: 1.5 MPa
Ambient and fluid temperature: 5-60℃
Piston speed: 50-400mm/s
Port connection: M5 x 0.8
Sealing: Rubber pads at both ends
Product Features
Lightweight design: The weight of the CY1SG15-250Z has been reduced by 15% compared to the previous generation, weighing only 0.96 kg.
Compact size: The overall length has been shortened by 15 mm, now just 240 mm.
High durability: Lubrication retainers are installed on the inner and outer surfaces of the cylinder barrel, effectively improving lubrication and enhancing the pneumatic cylinder's durability.
High-precision adjustment: Adjustment screws improve the accuracy of stroke and repeatability of positioning.
Application Scenarios
The SMC CY1SG15-250Z magnetic coupled rodless cylinder is widely used in the following fields:
Automated production lines: In automated production lines that require precise positioning and high repeatability, such as semiconductor manufacturing, medical device assembly, and precision instrument processing.
Machine processing: For precise positioning and automated control in various machine processing equipment.
Logistics and warehousing: In logistics automation systems, for handling and positioning of goods.
Usage Instructions
Installation and Wiring:
Installation environment: Choose an environment free of dust, corrosive gases, and strong electromagnetic interference, and ensure good heat dissipation of the equipment.
Wiring requirements: Strictly follow the wiring diagram in the product manual of the rodless actuator to ensure the correct connection of power lines, signal lines, and air source lines.
Grounding protection: Ensure good grounding of the equipment, in compliance with national and local electrical safety standards.
Parameter Settings:
Basic parameter settings: Including the settings of cylinder stroke, speed, etc., according to the actual application requirements.
Advanced function configuration: Such as multi-speed control, configure according to specific application scenarios to achieve more complex control functions.
Maintenance and Inspection:
Regular inspection: Check for any damage to the rodless actuator's appearance, aging of seals, and wear of sliders. Regularly clean dust and oil stains on the cylinder surface to ensure normal operation.
Parameter verification: Regularly verify the parameter settings of the pneumatic cylinder to ensure they remain consistent with actual application requirements.
Fault diagnosis: When the equipment fails, promptly check the fault code and troubleshoot according to the fault diagnosis guide in the manual.
Precautions
Environmental conditions: Avoid using the rodless actuator in environments with high temperature, high humidity, or strong electromagnetic interference, as this may affect its performance and lifespan.
Load requirements: Do not load the pneumatic cylinder with a load exceeding the allowable value specified in the selected documentation, as accidents may occur.
Safe operation: During equipment operation, avoid contact with live parts and moving components to ensure the safety of operators. When performing maintenance and inspection, make sure to cut off the air and power supply and wait for the equipment to come to a complete stop.
Frequently Asked Questions (FAQ)
How to adjust the magnetically coupled rodless cylinder's stroke?
Importance of stroke adjustment: Stroke adjustment is a key step to ensure the pneumatic cylinder accurately stops at the designated position. By adjusting the stroke, the positioning accuracy and work efficiency of the equipment can be improved.
Precautions during adjustment: When adjusting the stroke, make sure the cylinder is in a stationary state to avoid damaging the cylinder during the adjustment process. Also, ensure the tightening torque of the adjustment screw meets the requirements.
Effects after adjustment: After completing the stroke adjustment, the pneumatic cylinder will be able to accurately stop at the designated position, improving the stability and reliability of the equipment's operation.
How to choose the piping form for CY1SG15-250Z?
Piping form: The CY1SG15-250Z supports centralized piping, which can simplify the installation process and enhance the reliability of the system.
Piping connection: When connecting the air source, ensure the use of appropriate air hoses and fittings to prevent air leakage. Also, make sure the pressure and flow rate of the air source meet the requirements of the rodless actuator.
Maintenance and care: Regularly check the connection of the air hoses and fittings. If any looseness or damage is found, replace them in time.
How to select the installation method for the magnetically coupled rodless cylinder?
Installation location: Choose an environment with good ventilation, free of dust and corrosive gases for installation. Avoid installing pneumatic cylinder in environments with high temperature, high humidity, or strong electromagnetic interference.
Installation method: Ensure the cylinder is installed vertically for better heat dissipation. Use appropriate fixing methods during installation to prevent vibrations from affecting the equipment.
Load requirements: When installing, ensure the load on the cylinder is within the allowable range to avoid overloading.
How to set the cushioning device for CY1SG15-250Z?
Cushioning device type: The CY1SG15-250Z rodless actuator is equipped with a rubber cushioning device, which can provide cushioning at the end of the stroke, reducing impact.
Adjustment of cushioning device: When adjusting the cushioning device, loosen the hex nut and use a hex wrench or manually move the cushioning bolt to the preset stroke position. When fixing the cushioning bolt, use an appropriate tightening torque.
Cushioning effect: By properly setting the cushioning device, the impact of the cylinder at the end of the stroke can be effectively reduced, extending the service life of the equipment.
How to avoid electromagnetic interference for the rodless actuator?
Built-in filter: The rodless actuator is equipped with an EMC filter that complies with relevant electromagnetic compatibility standards, effectively suppressing electromagnetic interference.
Wiring precautions: When wiring, try to avoid placing signal lines close to power lines to reduce electromagnetic interference. Use shielded cables for signal line connections and ensure the shielding layer is well grounded.
Grounding measures: Good grounding is an important means of reducing electromagnetic interference. Ensure the equipment is well grounded and complies with national and local electrical safety standards.
What are the protection functions of CY1SG15-250Z magnetically coupled rodless cylinder?
Overload protection: When the pneumatic cylinder's load exceeds the rated value, the cylinder will automatically stop running to protect the equipment.
Overheat protection: The cylinder is equipped with a temperature sensor inside. When the temperature exceeds the set value, it will automatically shut down to prevent damage caused by overheating.
Overpressure and underpressure protection: When the air source pressure is too high or too low, the cylinder will automatically shut down to protect the equipment. In addition, it also has short-circuit protection and phase loss protection functions to ensure the safe operation of the system.
How to perform regular maintenance on the magnetically coupled rodless cylinder?
Appearance inspection: Regularly check the pneumatic cylinder's appearance for any damage or abnormalities, such as cracks in the casing or loose screws.
Seal inspection: Check if the seals are aging or damaged. If any issues are found, replace them in time.
Slider inspection: Check the wear of the slider to ensure its normal operation. If there is wear, replace the slider in time.
What should be noted when installing the pneumatic cylinder?
Installation location: Choose an environment with good ventilation, free of dust and corrosive gases for installation. Avoid installing the cylinder in environments with high temperature, high humidity, or strong electromagnetic interference.
Installation method: Ensure the cylinder is installed vertically for better heat dissipation. Use appropriate fixing methods during installation to prevent vibrations from affecting the equipment.
Air source connection: When connecting the air source, ensure the specifications of the air hose meet the requirements and pay attention to the pressure and flow rate of the air source.
How to choose the control mode for CY1SG15-250Z pneumatic cylinder?
Choose according to application requirements: For applications that require high-precision positioning, choose the control mode with cushioning bolts; for general constant-speed control applications, choose the control mode with hydraulic cushioning devices.
Characteristics of control modes: The control mode with cushioning bolts can provide more precise positioning, suitable for occasions with high positioning accuracy requirements; the control mode with hydraulic cushioning devices is simple and easy to use, suitable for general constant-speed control.
Parameter settings: After choosing the control mode, set the parameters according to specific application requirements to achieve the best control effect.
How to set the stroke accuracy of the pneumatic cylinder?
Importance of stroke accuracy: Stroke accuracy is a key factor to ensure the rodless cylinder accurately stops at the designated position. By improving stroke accuracy, the positioning accuracy and work efficiency of the equipment can be enhanced.
Adjustment of stroke accuracy: By adjusting the stroke screw and cushioning bolt, the stroke accuracy of the cylinder can be improved. During the adjustment process, ensure the cylinder is in a stationary state to avoid damaging the cylinder during the adjustment.
Effects after adjustment: After completing the stroke accuracy adjustment, the cylinder will be able to accurately stop at the designated position, improving the stability and reliability of the equipment's operation.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
