-
202302-21Omron CP1 series PLC interrupt classification
1. Direct I/O interrupt is a change in the interrupt input from the built-in input unit on the CPU rack (0→1; 1→0).2, count interrupt, PLC CPU unit built-in input pulse count, count reach set value ···
-
202302-21Omron plc equipment disassembly sequence and method
(1) Stop the machine for maintenance, and more than two people must monitor the operation;(2) Switch the mode selection switch on the front panel of CPU from "Run" to "Stop" positi···
-
202302-20This section describes how to set the bios of Advantech mainboard
1. Set the system date and timeOn the standard BIOS setting screen, press arrow keys to move the cursor to Date and Time, and then press Page Up/Page Down or +/&S722 to correct the date and time o···
-
202302-20This section describes how to set the bios after the Advantech 610l is powered on
1. Press Del to enter BIOS Settings. The following main menu is displayed.2. Select the IntegratedPeripherals TAB and press Enter to enter the menu below.3. Select SupperlODevice and press Enter to ac···
-
202302-17959698 reasons for failure of Siemens 3RW44 soft starter
3RW44 Soft starter 95,96,98 is a comprehensive fault, what causes it to operate?95,96,98 reasons for failure of Siemens 3RW44 soft starter95,96,98 is the normally open normally closed integrated fault···
-
202302-17New features of Siemens SIMATIC S7-1200 PLC V2.0
In addition to the existing product features, SIMATIC S7-1200 V2.0 adds the following mechanisms and features:Integrated PROFINET-IO controller interface with integrated PROFINET interfaceProfibus DP ···
English
- English
- 简体中文
- Español
- Pусский
- français
- Deutsch
- italiano
- Português
- 日本語
- हिंदी
- 한국어
- Tiếng Việt
- ภาษาไทย
News
Services
Contact Us
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
Copyright © 2024 Beijing Zhongping Technology Co., LTD..All Rights Reserved. |Map