Fuji Electric

  • Fuji GYS500DC2-T2A Servo Motor: Servo Motor Work Solutions

Fuji GYS500DC2-T2A Servo Motor: Servo Motor Work Solutions

The Fuji GYS500DC2-T2A servo motor is a high-performance DC servo motor with a rated power of 0.05KW, widely used in automation equipment, robotics, and precision machinery. This motor is designed to provide efficient and stable operation, ensuring reliability in variou···

  • Contact Us Contact On WhatsApp
  • 010-64225983

    +8613811814778

    info@zhongpingtech.com

    Building 26, Liyuan Community, Chaoyang District, Beijing, China

 The Fuji GYS500DC2-T2A servo motor is a high-performance DC servo motor with a rated power of 0.05KW, widely used in automation equipment, robotics, and precision machinery. This motor is designed to provide efficient and stable operation, ensuring reliability in various working environments. Its outstanding control accuracy and response speed make it suitable for a wide range of industrial applications. The servo motor is particularly known for its high precision and reliability, making it an ideal choice for applications requiring precise motion control. The servo motor work (UPS) system ensures continuous power supply, enhancing the stability of the motor's operation.

 

Fuji GYS500DC2-T2A Servo Motor: Servo Motor Work Solutions

Product Specifications

Rated Power  : 0.05KW, ideal for small load applications.

Rated Voltage  : 220V, compatible with multiple power standards.

Rated Current  : 0.25A, ensuring stable operation under high load.

Speed Range  : 0-3000RPM, offering flexible speed adjustment.

Control Method  : It uses a high-precision closed-loop control system to ensure precise positioning and speed control of the servo motor.

Communication Interface  : It supports multiple communication protocols, facilitating integration with PLC and other control systems.

 

Product Features

High-Precision Control  : This servo motor employs advanced control algorithms to achieve high-precision position and speed control, making it suitable for applications that require high control accuracy.

Fast Response  : The motor has an extremely fast response speed, enabling it to reach the set speed in a short time, making it suitable for dynamic load applications.

Compact Design  : The motor's small size makes it easy to install in equipment with limited space, making it suitable for various industrial automation scenarios.

Durability  : Made with high-quality materials and advanced manufacturing processes, the motor has good wear resistance and anti-interference capabilities, ensuring long-term stable operation.

 

Application Scenarios

Automation Equipment  : Widely used in production lines and assembly lines to provide precise motion control.

Robotics  : Serves as the driving unit in industrial robots, responsible for executing precise motion tasks.

Precision Machinery  : Suitable for high-precision equipment such as CNC machines and laser cutting machines, ensuring processing accuracy and efficiency.

Medical Equipment  : Provides stable power support in medical devices, ensuring the reliability and safety of the equipment.

 

Instructions for Use

 

Installation and Wiring

Environmental Requirements  : Install in a dust-free, non-corrosive gas environment to ensure good motor heat dissipation.

Wiring Requirements  : Follow the wiring diagram in the product manual strictly to ensure the correct connection of power and signal lines.

Grounding Protection  : Ensure the equipment is properly grounded, in compliance with national and local electrical safety standards.

 

Parameter Settings

Basic Parameter Settings  : Set the motor's control mode, speed range, and other basic parameters according to actual application requirements.

Advanced Function Configuration  : Such as PID control, configure according to specific application scenarios to achieve more complex control functions.

 

Maintenance and Inspection

Regular Inspection  : Check the motor's appearance for damage to ensure normal operation.

Parameter Verification  : Regularly verify the motor's parameter settings to ensure they remain consistent with actual application requirements.

Fault Diagnosis  : When the equipment fails, promptly check the fault code and troubleshoot according to the troubleshooting guide in the manual.

 

Precautions

Environmental Conditions  : Avoid using the product in high-temperature, high-humidity, or strong electromagnetic interference environments to prevent affecting its performance and lifespan.

Power Requirements  : Ensure stable power voltage to prevent damage to the servo motor from voltage fluctuations.

Safe Operation  : Avoid contact with live parts during equipment operation to ensure the safety of operators.

 

Frequently Asked Questions (FAQ)

 

How to perform motor self-tuning for a servo motor? 

Motor self-tuning is an essential step to ensure the servo motor matches the control system. First, users need to set the motor's nameplate parameters, including rated power, rated voltage, and rated current. These parameters are the foundation for the motor's normal operation and control accuracy.

During the self-tuning process, the control system injects current into the motor, so it is crucial to ensure the motor is correctly connected to the control system and is in a stationary state. Avoid damaging the motor during the self-tuning process.

After the self-tuning is complete, the control system will automatically adjust the control parameters based on the motor's actual parameters to achieve the best operating effect. This not only improves the system's response speed but also ensures control accuracy, meeting the application requirements for high-precision control.

 

How to choose the power range of a servo motor? 

When selecting the power range of a servo motor, it is necessary to determine it based on the actual load conditions. If the load is light, you can choose a motor that matches the rated power of the motor; if the load is heavy, it is recommended to choose a motor with a slightly higher power to cope with sudden situations.

When selecting the power range, it is also necessary to consider the safety factor of the system. It is usually recommended to choose a motor with a slightly higher rated power to cope with load fluctuations and sudden situations, ensuring the stability and safety of the system.

The motor has a certain overload capacity and can withstand a load exceeding the rated power in a short time. However, long-term overload will affect the motor's lifespan and performance, so it is advisable to avoid long-term overload operation when selecting the power range.

 

What is the cooling method of the servo motor? 

The motor uses natural cooling, dissipating heat through the heat sink on the motor housing. The design fully considers the cooling performance to ensure stable operation of the servo motor under high load.

When installing the motor, ensure there is enough space around it for air circulation. Avoid installing the motor in a closed or poorly ventilated environment to prevent poor cooling effects.

Regularly clean the dust on the motor housing and heat sink to effectively prevent equipment overheating due to poor cooling. At the same time, check the motor's operating condition to ensure its normal operation and extend the motor's lifespan.

 

How to avoid electromagnetic interference in servo motors? 

The motor is equipped with an EMC filter, which meets relevant electromagnetic compatibility standards and can effectively suppress electromagnetic interference. Users should ensure the motor is properly grounded to reduce interference when in use.

When wiring, try to avoid placing signal lines close to power lines to reduce electromagnetic interference. At the same time, use shielded cables for signal line connections and ensure the shield is properly grounded.

Proper grounding is an important means of reducing electromagnetic interference. Ensure the equipment is grounded in accordance with national and local electrical safety standards to ensure the normal operation of the servo motor.

 

What are the protection functions of the servo motor? 

The motor has overload protection. When the motor load exceeds the rated value, the control system will automatically reduce the frequency or stop running to protect the motor and control system.

The motor is equipped with a temperature sensor inside. When the temperature exceeds the set value, it will automatically shut down to prevent damage from overheating. In addition, it also has overvoltage and undervoltage protection functions to ensure the safe operation of the servo motor.

In addition, the motor also has short-circuit protection and phase-loss protection functions to ensure safety under various operating conditions and prevent equipment damage from unexpected situations.

 

How to perform regular maintenance on servo motors? 

Regularly check the motor's appearance for damage to ensure normal operation.

Clean the dust on the motor heat sink to ensure the normal operation of the cooling system. Check the motor's operating condition, and if there are any abnormalities, replace or repair it in time to prevent the fault from expanding.

Check whether the connections of the power and signal lines are secure to ensure good contact. At the same time, regularly verify the motor's parameter settings to ensure they remain consistent with actual application requirements.

 

What are the precautions for installing a servo motor? 

The installation location should be in a well-ventilated, dust-free, and non-corrosive gas environment. Avoid installing the motor in high-temperature, high-humidity, or strong electromagnetic interference environments to ensure stable motor operation.

Ensure the motor is installed vertically to facilitate heat dissipation. Use appropriate fixing methods during installation to prevent vibration from affecting the equipment.

When connecting the power supply, ensure the power line specifications meet the requirements and pay attention to the correct phase sequence. At the same time, ensure the equipment is properly grounded in accordance with national and local electrical safety standards.

 

How to choose the control mode of a servo motor? 

Choose the control mode based on application requirements. For applications that require high-precision speed control, choose closed-loop control mode; for general constant-speed control applications, choose open-loop control mode.

Different control modes have different characteristics. Closed-loop control mode can achieve high-precision speed and position control, suitable for applications with high control accuracy requirements; open-loop control mode is simple and easy to use, suitable for general constant-speed control.

After selecting the control mode, configure the parameters according to specific application requirements to achieve the best control effect.

 

How to set the frequency setting channel of the motor? 

The frequency setting method can be set through the motor panel, external analog signal, or digital signal. Users can choose the appropriate frequency setting method based on actual application requirements.

When setting the frequency setting channel, ensure the stability and accuracy of the signal source. For example, when using an external analog signal for frequency setting, ensure the stability and anti-interference capability of the signal.

Configure the parameters according to the selected frequency setting method. For example, for external analog signal setting, set the input range of the signal and the corresponding frequency range to ensure the normal operation of the servo motor.

 

How to solve the noise problem of the servo motor? 

Motor noise can be caused by various factors, including mechanical vibration of the motor itself, bearing wear, or power interference. First, check whether the motor is securely installed to ensure it does not vibrate excessively during operation.

Regularly inspect the motor bearings and replace them if worn. Worn bearings can cause abnormal noise during motor operation, affecting the motor's lifespan.

Check the power quality to ensure stable power voltage and prevent increased motor noise due to power interference. If the power quality is poor, consider using a voltage stabilizer or filter to improve it.

 

 


Company Profile

Beijing ZhongPing Technology Co., Ltd.

Beijing Zhongping Technology Co., Ltd. is a leading one-stop provider for intelligent manufacturing, specializing in robotics, automation equipment, and core components. As a technology-driven enterprise, we integrate scientific research, design, marketing, technical services, and international trade.

With offices in key industrial regions and multiple global service points, we are committed to "making intelligent manufacturing simpler." Our focus on intelligence and digitalization positions us as a premier solution provider, driving advancements in the industry while enhancing productivity and efficiency for our clients.

Explore how we can elevate your manufacturing processes in today's dynamic industrial landscape.

  • 2000+

    Cooperative merchants

  • 1000

    Office space

  • 50000+

    Serve customers

  • 100+

    Industry experts

Proxy Certificate

  • HIKVISION robot
  • Siemens EP
  • Simphoenix/四方电气
  • Siemens ET
  • Hikvision/海康威视
  • ALIBABA

FAQ

1.Who are We?

Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.


2.What can you buy from us?

PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components


3.Is the item in stock or need to be purchased from another supplier?

We have a large inventory of goods and have our own warehouse.


4.What advantages do we have over other suppliers?

Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.


5.Can you provide 100% new original authentic products?

We only sell new original genuine, no renovation, no fake, only for the original factory original!


6.How long is the delivery time?

If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.


7.Is there technical support available?

Of course, we have a professional technical team that can help you solve technical problems.


8.How do we guarantee quality?

We have three processes to control the quality of goods.

1). Our engineers will inspect the production and quality control in the factory regularly.

2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.

3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.


9.Can you guarantee the safe and reliable delivery of your products?

Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.


10.How about the freight?

The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.