Technical data
SIMATIC S7-200 SMART, Digital input EM DI16, 16 digital input terminals, 24V DC, perfusion current/pull current
General information
Product Type Label SM DI16, DI 16x24 VDC
Supply voltage
Rating (DC) 24 V
Allowable range, lower limit (DC) 20.4V
The upper limit (DC) is 28.8V
Input current
Consumption current, typical value 4 mA; Current per channel at 24 V DC input
Consumption current, maximum 5 mA; Current per channel at 30 V DC input
From the backplane bus DC 5 V, typical value 85 mA; 5 V DC from the CPU module
From the backplane bus DC 5 V, maximum 105 mA; 5 V DC from the CPU module
Digital input
Number Number of input terminals 16
● In the component 4
The parallel switch at the input is
Input characteristics comply with IEC 61131, type 1 is
The number of inputs that can be controlled simultaneously
All mounting positions
- The maximum is 40 ℃ and the maximum is 16 ℃
Horizontal mounting position
- The maximum is 50 ℃, and the maximum is 16 ℃
Vertical mounting position
- The maximum is 40 ℃ and the maximum is 16 ℃
Input voltage
● Input voltage type DC
● Rating (DC) 24 V
● For signal "0" < 5 V DC
● For signal "1" +15 to +30 V
Input current
● For signal "0", maximum (allowed closed circuit current) 1 mA
● For signal "1", minimum value 2.5mA
● For signal "1", maximum 5.5mA
● For signal "1", the typical value is 4 mA
Input delay (when input voltage is rated)
For standard input
- When the value ranges from 0 to 1, the maximum value is 200 µs
- When the value ranges from 1 to 0, the maximum value is 200 µs
Conductor length
● Shielding, maximum 500 m
● Unshielded, maximum 300 m
Digital output
Number Number of output terminals 0
Conductor length
● Shielding, maximum 500 m
● Unshielded, maximum 300 m
Alarm/diagnosis/status information
Diagnostic display LED
● For input side status is
Potential isolation
Digital input potential isolation
● Between the channels is; Photoelectric coupler
● Between channels, group the number of points 4
insulation
Insulation test using 1500 V AC for 1 minute
EMV
Resistance to static discharge interference
● Resistance to static discharge interference in accordance with IEC 61000-4-2; ±4 kV contact discharge (in accordance with IEC 801-2/IEC 1000-4-2; ESD); ±8 kV air discharge (in accordance with IEC 801-2/IEC 1000-4-2; ESD)
-- The test voltage of air discharge is 8 kV
-- Test voltage of contact discharge is 4 kV
Anti-interference ability against high frequency electromagnetic field
● Anti-interference for high frequency rays, in line with IEC 61000-4-3; 10 V/m, 80 to 1000 MHz (in accordance with IEC 61000-4-3); 10 V/m, 900 MHz, 1.89 GHz, 50% ED (in accordance with IEC 61000-4-3)
-- High-frequency radiation ranges from 80 to 1000 MHz, 10 V/m, 1.4 to 2.0 GHz, 3 V/m, 2.0 to 2.7 GHz, 1 V/m
Resistance to interference in relation to wires
● The anti-jamming ability of the power supply wire conforms to IEC 61000-4-4. ±2 kV in accordance with IEC 61000-4-4, pulse; Surge measurement with protective element
● Anti-interference ability of signal wire, in line with IEC 61000-4-4 is; ±2 kV in accordance with IEC 61000-4-4, pulse
Anti-jamming capability against impulse voltage (surge)
● The anti-jamming ability of the power supply wire conforms to IEC 61000-4-5. Surge measurement with additional protective elements: ±1kV (in line with IEC61000-4-5; μs pulse/lead-to-lead); ±2 kV (in line with IEC61000-4-5; μs pulse/wire to ground)
● Asymmetric coupling ±2 kV in accordance with IEC 61000-4-5, asymmetric surge current
-- Test voltage on the power supply wire 2 kV
-- Test voltage of 2 kV on signal wire (greater than 30 m)
Anti-jamming ability against the amount of wire interference caused by high frequency field
● For high frequency feed anti-interference, in line with IEC 61000-4-6 is; 10 V, 150 kHz to 80 MHz (according to IEC 61000-4-6)
● Anti-interference for high frequency rays, in line with IEC 61000-4-6 is; 10 V/m, with 80% amplitude modulation 1 kHz; 10 kHz to 80 MHz (in accordance with IEC 61000-4-6)
-- 9 kHz... The test voltage is 10 V at 80% 1KHz amplitude modulation within 80 MHz range
Suppression of radio interference radiation according to EN 55 011
● Radio radiation interference Emission interference in accordance with EN 50081-2, tested in accordance with EN 55011, Class A, Group 1
● Limit grade A is suitable for industrial applications; EN 61000-6-4, Emission interference: Applications in industrial applications.
Protection level and protection category
Protection level IP Address IP20
Standards, licenses, certificates
The CE mark is; CE Marking/EU conformance Declaration
Environmental requirements
In the open
● Maximum drop 0.3m
Operating ambient temperature
● Minimum value 0 °C
● Maximum 55 °C
● Horizontal installation, minimum value 0 °C
● Horizontal installation, maximum 55 °C
● Vertical installation, minimum value 0 °C
● Vertical installation, maximum 45 °C
Ambient temperature during transportation/storage
● Minimum value -40 °C
● Maximum 70 °C
Relative air humidity
● No condensation operation at 25 °C, maximum 95%
dimension
Width 45 mm
Height 100 mm
Depth 81 mm
weight
Weight, about 176 g
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
