The OMRON Inverter 3G3MX2 AB022 ZV1, also known as the OMRON VFD (Variable Frequency Drive) or OMRON MX2 Inverter, is a top - tier industrial automation drive device. It boasts a rated power of 0.4kW, operates on a single - phase 200 - 240V power supply voltage, and delivers a rated current of 0.8A. With an extensive output frequency range from 0.5Hz to 400Hz, it can precisely control motor speeds to meet diverse industrial production requirements. This OMRON Inverter is equipped with advanced vector control technology, enabling high - precision speed and torque control of motors, even without sensors, ensuring stable and efficient operation under various loads. Widely used in fans, pumps, conveyor belts, and other industrial scenarios, it is highly trusted and praised by numerous industrial users for its outstanding performance, stable operation, and user - friendly interface.
Product Parameters
Key Specifications
Rated Power: 0.4kW, suitable for driving small and medium - sized power motors, ideal for various small - scale industrial equipment.
Power Supply Voltage: Single - phase 200 - 240V, adaptable to standard voltages in different countries and regions, facilitating global use.
Rated Current: 0.8A, ensuring stable operation under rated load and proper functioning of the equipment.
Output Frequency Range: 0.5Hz to 400Hz, offering an extremely wide speed control range to precisely manage motor speeds for various process requirements.
Control Modes: Multiple options including vector control, sensorless vector control, and V/F control. Users can choose flexibly based on application scenarios to achieve optimal control effects.
Communication Interface: Standard RS485 communication interface supporting the Modbus protocol, enabling easy communication with PLCs, upper - level computers, and other devices for centralized control and remote monitoring.
Protection Functions: Equipped with overload, overheat, overvoltage, undervoltage, and short - circuit protection, comprehensively safeguarding the OMRON Inverter and motor from damage due to abnormal conditions.
Environmental Adaptability: Capable of operating normally in ambient temperatures ranging from - 10°C to + 50°C, suitable for various harsh industrial environments.
Product Features
Advanced Functionality
High Precision Control: Utilizing advanced vector control algorithms, the OMRON VFD achieves high - precision speed and torque control of motors even without sensors, ensuring stable operation under different loads.
User - Friendly Operation: Equipped with an intuitive digital dial and a four - digit LED display, users can easily access and adjust all important parameters and monitor the OMRON Inverter's working status in real - time.
Simple Wiring: Featuring integrated spring clamps for quick connection of control and power lines, simplifying the wiring process and improving reliability and efficiency.
Durability: Equipped with high - performance heat - resistant capacitors and cooling fans with sealed bearings, these high - quality components effectively extend the OMRON MX2 Inverter's service life.
Safety and Reliability: Compliant with the EN61800 - 5 - 2 standard, it features an emergency safety stop input function, ensuring the safety of both operators and equipment.
Applications
Diverse Industrial Uses
Fan Control: Used in HVAC and ventilation systems to control fan speeds, adjusting air volume according to actual needs to achieve energy savings and stable air circulation.
Pump Drive: Applied in water treatment, chemical, and food and beverage industries to control pump speeds, adapting to different flow requirements and improving pump efficiency.
Conveyor Belt Control: In logistics, packaging, food processing, and manufacturing industries, it precisely controls the start, stop, and speed regulation of conveyor belts.
Machine Tool Applications: For small machine tools and drilling machines, precise motor speed control improves machining accuracy and product quality.
Other Applications: Also suitable for textile, printing, and plastic processing industries, providing reliable speed control solutions for various motor - driven equipment.
Instructions for Use
Installation and Wiring
Installation Environment: Choose a well - ventilated, dust - free, non - corrosive gas, and low electromagnetic interference environment for installation.
Wiring Requirements: Follow the wiring diagram in the product manual strictly to ensure correct connections of power, signal, and motor lines.
Grounding Protection: Ensure proper grounding of the OMRON VFD, complying with national and local electrical safety standards.
Parameter Settings
Basic Parameter Settings: Including motor parameters, control modes, frequency range, etc. Users should make reasonable settings based on actual application requirements.
Advanced Function Configuration: Such as PID control, multi - speed control, program control, etc. Users can configure according to specific application scenarios.
Maintenance and Inspection
Regular Inspection: Periodically check the OMRON Inverter's appearance for damage, dust accumulation on heat sinks, and proper fan operation.
Parameter Verification: Regularly verify the OMRON VFD's parameter settings to ensure they match actual application requirements.
Fault Diagnosis: When equipment malfunctions, promptly check the fault code and troubleshoot according to the fault diagnosis guide in the manual.
Precautions
Important Considerations
Environmental Conditions: Avoid using the OMRON MX2 Inverter in high - temperature, high - humidity, or strong electromagnetic interference environments.
Power Supply Requirements: Ensure stable power supply voltage to prevent damage to the OMRON Inverter due to voltage fluctuations.
Safe Operation: Avoid contact with live parts during equipment operation to ensure operator safety.
Frequently Asked Questions (FAQ)
1. How to perform motor self - tuning for the OMRON Inverter?
Importance of Motor Self - Tuning: Motor self - tuning is crucial for ensuring compatibility between the OMRON VFD and the motor.
Precautions During Self - Tuning: Ensure the motor and inverter are correctly connected and that the inverter is in a ready - to - go state.
Effects After Self - Tuning: The OMRON Inverter will automatically adjust the control parameters based on the actual motor parameters.
2. How to configure the communication interface of the OMRON Inverter?
Communication Interface Type: The OMRON VFD is equipped with a Modbus protocol and supports an RS485 communication interface.
Communication Line Connection: Use shielded cables for connections and ensure the shielding layer is properly grounded.
Communication Parameter Setting: Set the communication address, baud rate, data bits, stop bits, and other parameters according to the communication protocol requirements.
3. How to select the power range of the OMRON Inverter?
Selection Based on Load Requirements: Determine the power range based on the actual load conditions of the motor.
Safety Factor Consideration: Choose an OMRON Inverter with a power slightly higher than the motor's rated power to cope with load fluctuations.
Overload Capability: The OMRON Inverter has a certain overload capacity but avoid long - term overload operation.
4. What is the cooling method of the OMRON Inverter?
Cooling Method: The OMRON Inverter uses forced air cooling with an internal cooling fan.
Installation Requirements: Ensure there is enough space around the OMRON Inverter for air circulation.
Maintenance and Care: Regularly clean the dust from fans and heat sinks to prevent equipment overheating.
5. How to avoid electromagnetic interference with the OMRON Inverter?
Built - in Filter: The OMRON Inverter is equipped with an EMC filter, complying with relevant electromagnetic compatibility standards.
Wiring Precautions: Avoid placing signal lines close to power lines and use shielded cables for signal line connections.
Grounding Measures: Ensure the OMRON Inverter is properly grounded, complying with national and local electrical safety standards.
6. What protection functions does the OMRON Inverter have?
Overload Protection: Automatically reduces the frequency or stops running when the motor load exceeds the rated value.
Overheat Protection: Equipped with a temperature sensor inside, automatically shutting down when the temperature exceeds the set value.
Overvoltage and Undervoltage Protection: Automatically shuts down when the power supply voltage is too high or too low.
7. How to perform regular maintenance on the OMRON Inverter?
Appearance Inspection: Regularly check the OMRON Inverter's appearance for damage or abnormalities.
Cooling System Maintenance: Clean the dust from heat sinks and fans to ensure the normal operation of the cooling system.
Electrical Connection Check: Check the connections of power and signal lines to ensure they are secure and make good contact.
8. What should be considered when installing the OMRON Inverter?
Installation Location: Choose an environment with good ventilation, free from dust and corrosive gases.
Installation Method: Ensure the OMRON Inverter is installed vertically to facilitate heat dissipation.
Power Connection: Ensure the power cable meets the required specifications and pay attention to the correct phase sequence.
9. How to select the control mode of the OMRON Inverter?
Selection Based on Application Requirements: Choose the most appropriate control mode based on the actual application scenario.
Characteristics of Control Modes: Vector control provides high - precision speed and torque control, while V/F control is suitable for general constant - speed control applications.
Parameter Setting: Set the parameters according to specific application requirements to achieve the best control effect.
10. How to set the frequency setting channel of the OMRON Inverter?
Frequency Setting Methods: Frequency can be set through the OMRON Inverter panel, external analog signals, or digital signals.
Signal Source Requirements: Ensure the stability and accuracy of the signal source.
Parameter Configuration: Configure the parameters according to the selected frequency setting method.
FAQ
1.Who are We?
Beijing Zhongping Technology Co., LTD., is a one-stop integrated service provider of intelligent manufacturing, belongs to the Gong Doctor Group, is a scientific research, design, marketing, technical services, industrial Internet, international import and export services as one of the science and technology companies.
2.What can you buy from us?
PLC, inverter, human-machine interface, hydraulic products, low-voltage power distribution, industrial robots and core components
3.Is the item in stock or need to be purchased from another supplier?
We have a large inventory of goods and have our own warehouse.
4.What advantages do we have over other suppliers?
Our company has a large amount of inventory and a number of warehouses, but also in the country's important industrial provinces and cities with offices and a number of overseas service points. To provide you with intelligent manufacturing one-stop comprehensive services, save efforts, labor and cost.
5.Can you provide 100% new original authentic products?
We only sell new original genuine, no renovation, no fake, only for the original factory original!
6.How long is the delivery time?
If there is a stock, it will take 2-3 working days to ship, if the quantity is large, it will take 5-7 working days after receiving the payment, if it is not a conventional model, it will take some time, we will inform you of the specific delivery time.
7.Is there technical support available?
Of course, we have a professional technical team that can help you solve technical problems.
8.How do we guarantee quality?
We have three processes to control the quality of goods.
1). Our engineers will inspect the production and quality control in the factory regularly.
2) Incoming materials shall be inspected by experienced purchasing engineers before they can be stored.
3). At least 2 people in the logistics department cross-check the goods to be sent before delivery.
9.Can you guarantee the safe and reliable delivery of your products?
Yes, we strictly adopt the international standard packing. We also use special packaging for dangerous goods, and refrigerated shipping for items with temperature requirements. Special item packaging and general cargo standard packaging requirements may incur additional costs.
10.How about the freight?
The cost depends on how you choose to get the goods. Express is usually the fastest but also the most expensive way. Sea freight is the best solution for large quantities of goods. The exact shipping cost depends on the purchase amount、quantity and weight of your order. Please feel free to contact us for more information.
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
