-
202212-29
This section describes how to set a gateway for Advantech switch eki-2528
step 1: Configure a VLAN. You are advised to allocate a dedicated VLAN, for example, VLAN 1000, for the management IP address of the switch on the network.Configuration command: vlan 1000step 2: Set a···
-
202212-29
Test method for Delta Circuit breakers AC contactors and frequency converters
1. Circuit breakerThe circuit breaker is a device that can be operated manually or automatically. It is used to control the on-off of the system power supply in the circuit system of the device. When ···
-
202212-29
Delta frequency converter maintenance steps
First, the repair of frequency converter must first check whether the sound in the operation of the motor is abnormal, including whether it is sensational in the operation of the motor.Two, check whet···
-
202212-29
Mitsubishi plc and computer communication setting method
Open the Mitsubishi plc programming software, menu "Online" -- >" transmission Settings "inside to select your connection method.1, first Mitsubishi plc and computer connection ···
-
202212-29
Mitsubishi fetch instruction and output instruction
1.LD (fetch command) A normally open contact and the left bus connection command, each logic line with normally open contact start to use this command;2.LDI (take the reverse instruction) a normally c···
-
202212-29
Fault and maintenance method of MCGS touch screen
1. The fault of touch deviationIf the finger touches the position and the mouse arrow does not coincide. After installing the driver, you should not touch the center of the bull 's-eye vertically ···