TPC1561HI MCGS on-state touch screen operation panel common faults
Published:2023-01-16 15:46:01
TPC1561HI MCGS touch screen operation panel common faults
(1) Black screen, flower screen and white screen
(2) LCD screen aging, low high pressure, lamp aging
(3) The LCD screen has no display, and the brightness is not clear
(4) LCD display vertical bar, display horizontal bar
(5) Communication connection failure
(6) Start and guide half of the motionless
(7) Startup cannot enter the user screen
(8) The glass is broken
(9) Replace the LCD
(10) The key is damaged, the key is not working
(11) No reaction when energized
(12) No backlight
-
202306-21
Delta servo motor regular diagnosis and repair method
First, the motor temperature is too high or the smoke motor common failureReasons :1. The load is too large; 2. Two-phase operation; 3. Air duct obstruction; 4. The working temperature is too high; 5.···
-
202302-10
Parameter interpretation of Omron relay
Rated working voltage (current) :Also known as coil voltage, it refers to the voltage or current that the relay can work reliably. When the relay is working, the input voltage or current of the relay ···
-
202301-11
Advantech industrial computer main features and use precautions
The main characteristics of Advantech industrial computer:1. Advantech industrial computer requires the ability to continuously work for a long time.2, the chassis has a special power supply, the powe···
-
202301-16
TPC1561HI MCGS on-state touch screen operation panel common faults
TPC1561HI MCGS touch screen operation panel common faults(1) Black screen, flower screen and white screen(2) LCD screen aging, low high pressure, lamp aging(3) The LCD screen has no display, and the b···
-
202302-23
The solution of Schneider inverter fault code
PHF: ⒈ Frequency converter power supply is not correct or fuse is blown; B. There is momentary defect in some phase. ⒈ Check the power supply connection and fuse; B. Reposition.USF: ⒈ Supply voltag···