What are the common faults of Advantech industrial computer?
Published:2023-01-11 17:19:29
1. Maintenance of chip-level motherboard, dealing with crash, startup without flash, power-off and other problems, and providing BGA service;
2. Deal with the black screen and flower screen in the operation of the industrial computer, and correct the keyboard and LCD flash screen;
3. Replace all kinds of industrial computer accessories, such as LCD flash screen, CD drive movement, keyboard, etc.
4. Dust removal and protection inside the machine;
5. The operating system cannot be installed on the industrial computer.
6. Press the switch of the industrial computer, you can see the indicator light on, but the screen does not flash;
7. An English or digital error message appears on the startup screen of the industrial computer, and the system cannot be accessed;
8. The industrial computer does not recognize CD-ROM drive, hard disk, floppy drive, serial port, parallel port, network card port, etc.
9. Press the switch of the industrial computer, but there is no reaction (can not start);
10. Industrial computer often crashes, power off or restarts automatically;
11. The battery of the industrial computer cannot be charged;
12 industrial computer startup flash, but the screen is very dark, with the brightness function key debugging without any change;
13. The touch screen of the industrial computer is white (no text image) or flower screen, but the external flash is normal;
14. The touch screen of the industrial computer has horizontal or longitudinal bright lines and bright belts;
15. The startup screen of industrial computer is black, but the image of external flash device is normal.
-
202303-01
The Siemens S7-1200 has three classifications of internal storage areas
The internal storage of the S7-1200 is divided into three types: working storage, loading storage and holding storage.Loading storage area:Non-volatile storage area. Used to store user project files (···
-
202303-02
Mitsubishi servo motors one-button adjustment function
When different servo motors are installed on the machine for the first time, they will occasionally show a poor match with the machinery during operation, which will lead to vibration, noise and other···
-
202302-15
How to calibrate the touch screen?
If the password of the system Settings of the Verantone touch screen hardware is lost, you can restore the factory Settings by system initialization. There are four ways to enter the Willenton touch s···
-
202301-17
ABB's four control modes for industrial robots
I. Point control mode (PTP)This control mode only controls the position of discrete points specified by the end effector of industrial robots in the workspace. When controlling, only the industrial ro···
-
202304-07
Mitsubishi plc program lost backup program write method
The plc program is lost because of the lack of battery power supply for the user to save the program, pc internal circuit problems, lightning strikes and other external high voltage impact caused by t···