-
202302-07How do I set the IP address of the touch screen
How to set the IP address when the touch screen is in useFor example: CMT2109X2 and CMT2079XFirst - > Click the little yellow button on the touch screenNext - > Click the lock symbolAgain - >···
-
202302-07WEINVIEW TK6070ih touch screen into the system setting what are the methods?
1. Generally, there is a small black arrow button in the lower right corner of the touch screen. After clicking and entering the correct password, you can enter the system Settings. However, during co···
-
202302-06Siemens Soft Starter 3RW44 can self-reset can be fault
Not all faults can be self-reset. The faults that can be self-reset are as follows (The method of self-reset is to set the corresponding parameters in the menu of the LCD screen) :1) Motor thermal mod···
-
202302-06Does the supply cable between the Siemens soft starter and the motor need shielding
For 3RW soft starters, it is sufficient to use an unshielded main loop cable between the motor and the 3RW soft starter.The main reasons are as follows:The frequency of the power supply on the motor t···
-
202302-03Reasons and solutions for the failure of Advantech Industrial computer
Advantech industrial computer can not open the machine may be industrial computer motherboard problemAdvantech industrial computer boot will self-check, to determine the condition of the machine, if t···
-
202302-03Advantech mainboard circuit maintenance method
1. Visual inspection: by looking at the way, whether the machine board card is burned out, less, and other phenomena, to determine the damage2 touch: the human hand feels the machine board card and ot···
English
- English
- 简体中文
- Español
- Pусский
- français
- Deutsch
- italiano
- Português
- 日本語
- हिंदी
- 한국어
- Tiếng Việt
- ภาษาไทย
News
Services
Contact Us
010-64225983
+8613811814778
info@zhongpingtech.com
Building 26, Liyuan Community, Chaoyang District, Beijing, China
Copyright © 2024 Beijing Zhongping Technology Co., LTD..All Rights Reserved. |Map