The hard disk light of Advantech industrial computer 610L is not on
Published:2023-05-12 11:10:20
Hard disk fault: The hard disk may be faulty, causing the hard disk indicator to be off. You can try to restart the computer. If it still does not light up, check whether the hard disk is recognized by the computer or try to replace the hard disk.
Bad disk connection: An off disk indicator may be caused by a bad disk connection. You can check whether the power supply and data cable of the hard disk are properly plugged in, or replace the data cable to try to solve the problem.
Hard disk indicator fault: The hard disk indicator may be faulty. You can try to replace the lamp, or contact after-sales technical advice for repair.
In short, if the disk indicator is off, you are advised to check whether the disk works properly and whether the disk connection and indicator are damaged. If the problem cannot be solved, you can contact the sales and after-sales technical consultation for consultation and maintenance.
-
202302-10
How to choose Omron relay
1, select the rated working current of electromagnetic relay coil: DC electromagnetic relay driven by transistor or integrated circuit, the rated working current of the coil (generally 2 times of the ···
-
202302-20
This section describes how to set the bios of Advantech mainboard
1. Set the system date and timeOn the standard BIOS setting screen, press arrow keys to move the cursor to Date and Time, and then press Page Up/Page Down or +/&S722 to correct the date and time o···
-
202212-29
This section describes how to set a gateway for Advantech switch eki-2528
step 1: Configure a VLAN. You are advised to allocate a dedicated VLAN, for example, VLAN 1000, for the management IP address of the switch on the network.Configuration command: vlan 1000step 2: Set a···
-
202302-23
The solution of Schneider inverter fault code
PHF: ⒈ Frequency converter power supply is not correct or fuse is blown; B. There is momentary defect in some phase. ⒈ Check the power supply connection and fuse; B. Reposition.USF: ⒈ Supply voltag···
-
202302-08
Reduce Schneider inverter interference measures
(1) Inductance and capacitance are added on the input side of Schneider inverter to form LC filtering network.(2) The power line of Schneider inverter is directly supplied from the transformer side.(3···